Vibration Controller

K2

Common hardware supports all types of vibration test.
The K2 controller provides the precision and repeatability required to test with condence during both product development and series production.
The K2 hardware and software has been developed in-house, giving IMV full design control of this important part of a vibration system.
The K2 system offers enhanced functions and operability based on the most advanced technologies and incorporating feedback from our customers.

K2

Features

■User-friendly interface

Instinctive Operation

[Intuitive operation]

Easily-recognised icons are used for file management.

Simplified definition

[Short-cut operations]

The key operations are initiated using a simplified set of commands.

Help

[Help]

Each stage of operation is supported by detailed help pages.

■Easy-to-use functions

Web monitor

[Web monitor]

A user can monitor a vibration test remotely by connecting over the internet.

Report generator

[Report generator]

Results can be exported to Microsoft Word in a range of customised formats.

Scheduler

[Scheduler]

Define the test schedule and execute it in order.

■Precision control capabilities
K2 employs high-resolution 24-bit A/D and D/A converters to achieve high-precision, repeatable control.
■Safety interlock function
A hardware mute function operating independently of software provides complete protection for the vibration system and payload.
■E-mail notification
Remote sites can be notified by email of any abnormality during testing or termination of a test.
■Data saving
Test definitions and results are output from the K2 in CSV format.

Software

Common optional software Outline
CAPTURE:
Analogue waveform
signal data program

Provides analogue waveform signal capture, saved data can then be used as the reference of
SHOCK, BMAC waveform controls or Random vibration PSD control.

• Sampling Frequency 51.2kHz maximum
• Data Length Maximum 5000k points
• Input Channel Maximum 64
• Waveform edit/analysis function Filtering, Frequency transfer processing, PSD transfer,
Transmissibility ratio between channels
SCHEDULER:Test scheduler Pre-defined tests can be executed in sequence.
Integrated Control System Signals are available from K2 to control a climatic chamber, synchronising thermal and vibration tests.

Specifications

Main Enclosure
Number of Slots 3 (Expandable by connecting additional slave units)
AC Power Single-phase AC, 100V-240V (Auto-selected)
Extension
Additional units can be interconnected (Providing support for large-scale systems)
External Communication Contact I/O (for Emergency stop)
Ambient Conditions 0-40℃, below 85% RH, non-condensing
Dimensions W430×H100×D340mm (excluding connectors etc.)
Mass Approximately 6.0kg
8-channel Input Module (option)
Number of Channels 8
Input Connector BNC
Input Signal
Charge,Voltage,IEPE
Charge Amplifier Sensitivity 1.0mV/pC or 10mV/pC
Charge Amplifier Cut-off 0.32Hz
Maximum Input Charge Input ±10000pC or ±1000pC
Voltage Input ±10000mV
IEPE Input ±10000mV
Sampling Frequency 51.2kHz maximum
Voltage Input Coupling AC or DC
AC Coupling Cut-off 0.1Hz
CCLD Amplifier(IEPE) +24VDC,3.5mA
TEDS(IEPE) Version 0.9, Version 1.0
A/D Converter Type : ΔΣ
Resolution : 24-bit
Dynamic range : 117dB
Digital filter : Pass-band ripple ±0.001dB
        : Stop-band attenuation 110dB
4-Channel Input and 4-Channel Output Module (standard)
●Input Section
Number of Channels 4
Input Connector BNC
Input Signal
Charge, Voltage, IEPE
Charge Amplifier Sensitivity 1.0mV/pC or 10mV/pC
Charge Amplifier Cut-off 0.32Hz
Maximum Input Charge Input ±10000pC or ±1000pC
Voltage Input ±10000mV
IEPE Input ±10000mV
Sampling Frequency 51.2kHz maximum
Voltage Input Coupling AC or DC
AC Coupling Cut-off 0.1Hz
CCLD Amplifier(IEPE) +24VDC,3.5mA
TEDS(IEPE) Version 0.9, Version 1.0
A/D Converter Type : ΔΣ
Resolution : 24-bit
Dynamic range : 117dB
Digital filter : Pass-band ripple ±0.001dB
        : Stop-band attenuation 110dB
●Output Section
Number of Channels 4 (One channel is reserved for drive output)
Output Connector BNC
Output Signal
Voltage
Maximum Output ±10000mV
Sampling Frequency 51.2kHz maximum
D/A Converter Type : ΔΣ
Resolution : 24-bit
Dynamic range : 120dB
Digital filter : Pass-band ripple ±0.005dB
        : Stop-band attenuation 75dB

Minimum Specification of PC

● One built-in PCI Express x1 slots
● Microsoft Windows 10 Pro ( 64bit )、Windows 10 IoT Enterprise ( 64bit ) or Windows 7 Professional SP1 ( 32bit/64bit ) is required*.
● Memory required ( for 8 input channels )
 Windows 7 ( 32 bit ) :2 GB or more
 Windows 7/10 ( 64 bit ) :4 GB or more
● DVD-ROM Drive ( required for installation )
● One USB port
● Resolution of monitor and PC required 1280 x 1024 or more
* Recommended OS and memory vary depending on software, options , number of I/O channels, etc.