Transportation Test Range

C-series

Large displacement is ideal for heavy weight transportation testing
C-series is optimized for transportation tests.
Transportation Vibration Test Systems C10/SA1MM

Features

■ Maximum load 1,000 kg
C-series increases the maximum load compared to the conventional system. It enables vibration testing for heavier specimens.
Maximum load 1,000 kg
■ Standard 76.2 mmp-p displacement
C-series has a displacement of 76.2 mmp-p (3 inch stroke) which gives good balance between specification of velocity, acceleration and displacement.
Standard 76.2 mmp-p displacement
■ High rigidity
C-series is designed for specimens which center of gravity is high or deviated from the center.
High rigidity

Table Insert Pattern (Unit:mm)

Table Insert Pattern

Specifications

  System Model C10/SA1MM
  Frequency Range(Hz) 0-2000
System
Specifications
Rated
Force
Sine(kN) 10
Random(kN rms) 7
Shock(kN) 20
Maximum
Acc.
Sine(m/s2) 400
Random(m/s2 rms) 280
Shock(m/s2 peak) 800
Maximum
Vel.
Sine(m/s) 1.2
Shock(m/s peak) 2.0
Maximum Displacement(mmp-p) 76.2
Maximum Load(kg) 1000
Power Requirements(kVA)*1 11.9
Breaker Capacity(A)*2 50
Vibration
Generator
Model C10
Armature Mass(kg) 25
Armature Diameter(φmm) 300
Allowable Eccentric Moment(N・m) 686
Dimensions(mm) WxHxD 1100x1142x840
Mass(kg) 3200
Power
Amplifier
Model SA1MM-C10
Maximum Output(kVA) 6.2
Dimensions(mm) WxHxD 580x1950x850
Mass(kg) 260
Controller See Vibration Controller K2
Cooling Cooling Method Air cooling
Blower Dimensions(mm)
WxHxD *3
479x1075x667
Mass(kg) 56
Wattage(kW) 2.2
Duct Hose Diameter(φ) 200
  • *1 Power supply required is 3-phase 200/220/380/400/415V, 50/60Hz. Voltage Down Transformer (Step-down transformer) is req uired for other voltage.
  • *2 In case of 200 V
  • *3 Spec described above is in case of 60Hz. Dimension is changed in case of 50Hz.
  • *The specification shows the maximum system performance. For long-duration tests, de-rating by up to 70 % must be applied. Continuous use at maximum levels may cause failure. Please contact IMV if you use more than 70 %.
  • *Armature mass and acceleration may change when chamber is comibined.
  • *Frequency range values vary according to sensor and signal generator.

to the top page