Multi-axis systems

Large scale 6 degrees of freedom vibration test system (6DOF)

Remarkable Technology with 6DOF Simulations
Multi (Simultaneous) Vibration Test Systems is mainly used for "Reproduction of More Realistic Vibration" as a goal.

Large Scale 6DOF  TS-9600-40L


◎Complying to new standard (JIS E 4031:2008 Rolling Stock Equipment Shock and Vibration Tests) and Allowing the simulations vibration testing of payloads either suspended underneath or placed on top of the frame.
◎With combination of 10 vibration generators, it does high level arithmetic processing which controls 10 corresponding points without any stress.
◎In multi-random test, it equipped with special algorism which allows a couple of control corresponding waveform to be the same.
◎Max. 96ch measurement is possible by developing specialised hardware and software.
◎Software offers necessary analysis required by JIS E 4031.


Direction X(Front Back) Y(Left-Right) Z(Up-Down)
SINE (Sine peak) 40kN×2 shakers (80kN) 24kN×2 shakers (48kN) 16kN×6 shakers (96kN)
RANDOM(G rms) 28kN×2 shakers (56kN) 16.8kN×2 shakers (33.6kN) 11.2kN×6 shakers (67.2kN)
SHOCK (shock peak) 147.5kN×2 shakers
88.5kN×2 shakers
32kN×6 shakers
Maximum displacement 51mm 51mm 51mm
Max. Vel.(shock peak)> 0.47m/s 0.287m/s 0.287m/s
Maximum loading mass 2500kg

Sample Mount Table

Dimensions of Diameter A (Screw Location) :
Armature Mass
Available dimensions 4000×3500mm×H850
(space between testing machine and table)
Dimensions of Diameter B (Screw Location) :
Armature Mass
Available dimensions 3000×3000mm×H850
(space between testing machine and table)